Dear Sir,
The following
are the test results on a spray lube oil sample sent for the following
tests.
Sample I.D.; SAPL
Tests |
Results |
1.
Falex E.P. properties ASTM D3233 |
|
Procedure
A True Load Failure |
3150 lb.f (14,011 N) |
Procedure
B True Load Failure |
3000 lb.f (13,344 N) |
2.
Falex wear properties: ASTM D2670 |
|
at 865
ft.lb (1173 Nm), number of teeth wear |
None |
3.
Extreme pressure properties, ASTM D2783 |
|
Load Wear
Index |
88.92 |
Weld
Point |
500 kg |
4.
Wear preventive properties, ASTM D2266 |
|
Average
Scar Diameter |
0.87 mm |
5.
Timken, OK load, ASTM D2782 |
60 lb (27 kg) |
6.
Viscosity at 210 ºF (99 ºC ) cSt, ASTM D445 |
50.7 |
SUS (Saybolt
Universal Seconds) |
235.77 |
7.
Viscosity at 210 ºF (99 ºC ) cSt, ASTM D445 |
7.0 |
SUS (Saybolt
Universal Seconds) |
49.01 |
8.
Viscosity index calculation ASTM D2270 |
104.0 |
9.
Pour Point, ASTM D47 |
-21 ºC |
10.
Flash Point, ASTM D56 |
275 ºF (135 ºC) |
11.
Flash Point, ASTM D92 |
315 ºF (157 ºC) |
12.
Flash Point, ASTM D93 |
270 ºF (132 ºC) |
13. Coefficient of Friction, ASTM D2266, modified |
0.0223 |
14. Salt spray
test, 100 hours at 5 % Salt Solution |
No Rust |
If you have any questions regarding these results call (512) 522 3006.
Sincerely,
Geronimo A. Estrada
Manager - Special Projects
Petroleum Products Research Dept.
Automotive Products & Emissions Res.
|